Utax 5240L

2
Preparation before Use
2-11
Setting Date and Time
Follow the steps below to set the local date and time at the place of installation.
When you send an E-mail using the transmission function, the date and time as set here will be printed in the header
of the E-mail message. Set the date, time and time difference from GMT of the region where the machine is used.
NOTE: Be sure to set the time difference before setting the date and time.
1 Press the System Menu/Counter key on the main unit
operation panel.
2 In the Sys. Menu/Count. menu, press the U or V key to
select [Common Settings].
3 Press the OK key. The Common Settings menu appears.
4 Press the U or V key to select [Date Setting], and press
the OK key.
5 A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
6 The Date Setting menu appears.
7 Press the U or V key to select [Time Zone].
Sys. Menu/Count.: a b
3 System
4 User/Job Account
*********************
5 Common Settings
Common Settings: a b
*********************
2 Default Screen
3 Sound
[ Exit ]
1 Language
Login User Name: L b
********************
Login Password:
[ Login ]
Date Setting: a b
*********************
2 Date Format
3 Time Zone
[ Exit ]
1 Date/Time