Utax 5240L

5
5-21
Sending Functions
Job Finish Notice
This feature sends an e-mail providing notification that transmission has been completed.
Use the procedure below to specify the Job Finish Notice settings.
1 Press the Send key.
2 Place the original.
3 Press the Function Menu key. Function Menu appears.
4 Press the U or V key to select [JobFinish Notice].
5 Press the OK key. JobFinish Notice appears.
6 Press the U or V key to select [On] and then press the
OK key.
7 Press the U or V key to select [Address Book] or
[Address Entry], and then press the OK key.
8 If you select [Address Book], select [Address Book] on
the next screen and press the OK key, and then select
the notice destination.
Press [Menu] (the Right Select key), select [Detail] on
the next screen and press the OK key to view the details
of the selected notice destination.
If you select [Address Entry], enter the address of the
notice destination.
NOTE: Refer to Character Entry Method on Appendix-5 for
details on entering characters.
9 Press the OK key.
Function Menu: a b
*********************
2 Original Size T
3
Original Image T
[ Exit ]
1 Color Selection T
JobFinish Notice: a b
*********************
2 On
1 *Off
Destination: a b
*********************
2 Address Entry
1 *Address Book
Address Book: a b
*********************
p Maury
p Morgan
[ Menu ]
p Fiala
Address Entry: A b
******@abcdefg.jp
*
ABC
[ Text ]