Utax 5240L

2
Preparation before Use
2-9
Switching the Language for Display [Language]
Select the language displayed on the Message Display.
Use the procedure below to select the language.
1 Turn on the main power switch.
2 Press the System Menu/Counter key on the main unit
operation panel.
When you are performing user management and have
not logged in, a login screen will appear. Then, enter the
user ID and password to log in.
NOTE: The following administrator is registered in the
machine at the factory.
Login User Name:4000
Login Password:4000
Refer to Character Entry Method on Appendix-5 for details
on entering characters.
3 In the Sys. Menu/Count. menu, press the U or V key to
select [Common Settings].
4 Press the OK key. The Common Settings menu appears.
5 Press the U or V key to select [Language].
Login User Name: L b
********************
Login Password:
[ Login ]
Sys. Menu/Count.: a b
3 System
4 User/Job Account
*********************
5 Common Settings
Common Settings: a b
*********************
2 Default Screen
3 Sound
[ Exit ]
1 Language