4-14
Copying Functions
Job Finish Notice
Sends a notice by E-mail when a copy job is complete. User can be notified of the completion of a copy job while
working at a remote desk, saving the time spent waiting beside the machine for copying to finish.
NOTE: PC should be configured in advance so that E-mail can be used.
Example of Job Finish Notice
Use the procedure below to enable job finish notification when making copies.
1 Press the Copy key.
2 Place the original.
3 Press the Function Menu key. Function Menu appears.
4 Press the U or V key to select [JobFinish Notice].
5 Press the OK key. JobFinish Notice appears.
6 Press the U or V key to select [On] and then press the
OK key.
To: h_pttr@owl-net.net
Subject: 1234 Job end report mail
Job No.: 000002
Result: OK
End Time: Wed 27 Apr 2005 14:56:08
File Name: doc27042005145608
Job Type: Copy
------------------------------------------------
1234
[00:c0:ee:d0:01:14]
------------------------------------------------
To Next Page
Loading...
