Why Utax Fax Machine cannot perform memory forwarding using a sub address?
J
Jennifer MasseySep 1, 2025
If your Utax Fax Machine cannot perform memory forwarding using a sub address, it could be due to the following reasons:
* Ensure that the recipient fax machine is equipped with a sub address transmission feature, as it is required for this function to work.
* Verify that the entered sub address is identical to the sub address registered in the recipient fax machine. If your entry is correct, check with the recipient. Note: This machine does not use a sub address password for reception.
S
Sabrina EstradaSep 12, 2025
Why is my Utax All in One Printer ejecting blank sheets?
L
lambertmichaelSep 12, 2025
If your Utax All in One Printer is ejecting blank sheets, check if the originals are loaded correctly. When placing originals on the platen, ensure they are face-down and aligned with the original size indicator plates. When using the optional document processor, place the originals face-up.
J
James GallegosAug 31, 2025
Why Utax Fax Machine cannot perform sub address transmission?
J
Jessica HernandezAug 31, 2025
If you cannot perform sub address transmission on your Utax Fax Machine, it could be due to the following reasons:
* Ensure that the recipient fax machine is equipped with a sub address transmission feature, as it is required for this function to work.
* Verify that the entered sub address or sub address password is identical to the sub address or sub address password registered in the recipient fax machine. If your entry is correct, check with the recipient. Note: This machine does not use a sub address password for reception.
* Check with the recipient to ensure there is free space available in the memory of their fax machine.
K
Kimberly CollinsSep 14, 2025
Why are images skewed on my Utax All in One Printer?
C
Christopher HayesSep 14, 2025
If images are skewed, ensure the originals are placed correctly. When placing originals on the platen, align them with the original size indicator plates. When placing originals in the optional document processor, align the original width guides securely before placing the originals. Also, check the position of the paper width guides to ensure the paper is loaded correctly.
A
Andrew WilliamsonSep 13, 2025
How to remove vertical streaks on Utax All in One Printer prints?
S
Samantha BensonSep 13, 2025
If vertical streaks appear on your prints, the inside of the Utax All in One Printer may be dirty. Check the toner container and replace it if necessary. Clean the charger wire.
B
bbradleySep 18, 2025
What to do if Utax All in One Printer says insufficient memory?
A
Ariel AlvarezSep 18, 2025
Further scanning cannot be performed due to insufficient memory. Press the OK key to print the scanned pages. Press the Cancel key to cancel the printing job.
E
ethomasNov 23, 2025
How to fix 'Add paper in cassette' error on Utax CD 1128 Fax Machine?
K
Krystal EvansNov 23, 2025
If your Utax Fax Machine displays 'Add paper in cassette 1 (~3). or Add paper in MP tray.' message, follow these steps:
* Ensure that the indicated cassette or MP tray is not out of paper. Add paper of the same size as indicated. When the type of printing paper is specified, the necessary paper types are also displayed.
* To use another paper source, select the paper source and press the OK key. Alternatively, press [Paper] (the Right Select key), select the desired paper source, and then press the OK key.
* If the type of printing paper is specified, and the cassette for the specified paper type is not available, press [Paper] (the Right Select key), select another paper source, and then press the OK key.
* Also, make sure that the cassette is securely loaded. Remove the cassette...
K
Katherine WilliamsAug 27, 2025
What to do if Utax Fax Machine displays 'Job Accounting restriction exceeded. Cannot scan.'?
M
Michael HarrisAug 27, 2025
If your Utax Fax Machine displays 'Job Accounting restriction exceeded. Cannot scan.', it indicates that fax transmission is prohibited by Job Accounting. To resolve this:
1. Press the OK key to cancel the current job.
2. Check the settings for Job Accounting to ensure fax transmission is allowed.
L
laurenhaleAug 27, 2025
What to do if Utax CD 1128 displays 'Job Accounting restriction exceeded'?
M
Mitchell MitchellAug 27, 2025
If your Utax Fax Machine displays 'Job Accounting restriction exceeded', it means the limit for paper use has been exceeded. To resolve this:
1. Press the OK key to cancel the current job.
2. Reset the limit for paper use in the Job Accounting settings.
3. Try performing the job again after resetting the limit.
K
Kelly NealAug 26, 2025
What to do if Utax CD 1128 shows 'Sub address/Polling limit exceeded'?
F
Frank CrossAug 26, 2025
If your Utax Fax Machine displays 'Sub address/Polling limit exceeded', it means the sub address box or polling box capacity is full. To resolve this:
1. Press the OK key to cancel the current job.
2. Print or delete the data in the sub address box to free up space.
3. Try performing the job again.
To Next Page
General