UTStarcom CDM8945 - Alarm Sounds; Display; Banner

SETTINGS SETTINGS
C
H
4
59
C
H
4
58
To select a ringer type for alarm sound:
ALARM SOUNDS
2
Select your desired ringer type.
3
Select one of the available ring types.
To confirm, press .
1
Press [MENU] and then select “Settings &
Tools” menu, press “Sounds” and then select
“Alarm Sounds”, press “Alarm Tone”.
ALARM TONE
2
Select “On” or “Off” with the Navigation Key and
then press to save it.
1
Press [MENU] and then select “Settings &
Tools” menu, press “Sounds” and then select
“Alarm Sounds”, press “Alarm Vibrate”.
ALARM VIBRATE
Allows you to customize the display.
DISPLAY
You can choose to display a personal Banner greeting or the
Enhanced Roaming Indicator (ERI) banner on the phone’s screens:
The text greeting can be up to 16 characters and is displayed on
your phone’s screen in standby mode.
BANNER
2
Enter a new personal greeting.
To change the input mode, press [Abc].
To return to the previous page, press
[CANCEL].
3
Press to save it.
1
Press [MENU] and then select “Settings &
Tools” menu, press “Display” and then select
“Banner”, press “Personal”.
PERSONAL
2
Select “On” or “Off” with the Navigation Key and
then press to save it.
1
Press [MENU] and then select “Settings &
Tools” menu, press “Display” and then select
“Banner”, press “ERI Banner”.
ERI BANNER
Up or Down key : 1. Get New or select your desired ringer type.
Press to play/pause the ringer