UTStarcom CDM8945 - Clock Format; Front Clock; Main Clock; Ringer ID

SETTINGS SETTINGS
C
H
4
79
C
H
4
78
CLOCK FORMAT
1
Press [MENU] and then select “Settings &
Tools” menu, press “Clock Format” and then
select “Main Clock”.
3
To save, press .
MAIN CLOCK
2
Select one of the following with the Navigation Key.
Digital
Analog
Off
l
l
l
To change the main clock’s appearance on the standby screen:
1
Press [MENU] and then select “Settings &
Tools” menu, press “Clock Format” and then
select “Front Clock”.
3
To save, press .
FRONT CLOCK
2
Select one of the following with the Navigation Key.
Digital
Analog
Off
l
l
l
To change the front clock’s appearance on the standby screen:
RINGER ID
1
2
Press [MENU] and then select “Settings &
Tools” menu, press “Ringer ID”.
Select “On” or “Off” with the Navigation Key
and then press to save it.
(Default setting is “Off”)
PICTURE ID
1
2
Press [MENU] and then select “Settings &
Tools” menu, press “Picture ID”.
Select “On” or “Off” with the Navigation Key
and then press to save it.
(Default setting is “Off”)