UTStarcom CDM8945 - Dtmf Tones; Train Words

C
H
4
77
SETTINGS
C
H
4
76
SETTINGS
1
Press [MENU], select “Settings & Tools” menu,
press “Call Settings”, select “Voice
Services”, and press “Train Words”.
TRAIN WORDS
2
Select one of the control words - “Yes”, “No” or
“Wake-Up”. “Please begin recording after the
prompt tone” will be displayed and you will hear
“Now training control words. Please say the word”.
Say the word. You will hear “Again”. Say the word
again. You will hear “Training word successful”.
To undo voice recognition, select a word you want
to undo then press [UNDO].
3
Under “Undo Train All”.
“Undo voice recognition for all procedures?”
will be displayed. Press to undo all trained
words.
Train allows you to use Control words to make a call without using
the keypad. Use to train or untrain Voice Recognition with the control
words, “Yes”, “No” or “Wake-Up”.
1
Press [MENU] and then select “Settings &
Tools” menu, press “Call Settings” and then
select “DTMF Tones”.
3
To save, press .
DTMF TONES
2
Select one of the following with the Navigation Key.
Normal
Long
Off
l
l
l
To adjust tone length: