UVD Robot Model B - User manual v2.1
Once the robot is correctly aligned with the map the screen will look similar to the image below:
Figure 23. Robot and map are aligned
You can close the MiR interface and open the UVD app. The correct rooms should be now
available in the UVD app to operate the robot as usual.
10. Maintenance
10.1. Basic visual inspection
A basic visual inspection should be conducted by the operator before starting to operate the
robot to ensure a good performance and avoid possible risks during operation. Firstly ensure
the robot is off and then check that:
● There are no evident marks or damage on the laser scanners
● There are no scratches in the UVD lamps
● On/off button is clean
● There is no evidence of damage on the robot or any of the accessories (i.e. tablet,
charging station, manual charger, etc.)
If you detect any damage on the robot or the accessories, that could affect its functionality,
please contact the UVD technical service.
30
To Next Page
Loading...
Need help?
General