UVD Robot Model B - User manual v2.1
ā Clean the robot by wiping it with a dry or slightly damp cloth. Do NOT use alcohol
based products as they can damage plastic coatings over time. Do NOT use
compressed air.
Laser caution!
This robot uses a laser class 1M, (eye-safe) under normal operational conditions.
The use of controls or adjustments other than those specified herein may result in hazardous
radiation exposure.
Do not open the housing, (opening the housing will not switch off the laser).
Do not look directly at the laser beam source using optical instruments (e.g. magnifying
glasses, lenses, etc.).
Cautions specific to safety sensor
Do not modify or disassemble safety sensors as such modifications will affect the detection
capability of the robot leading to injuries or damage. The modification of the sensor will void
the warranty.
Only technical service and qualified personnel who have been trained by UVD Robots may
install, disassemble or repair the product.
Modification of this robot and its components including the charging station and software /
apps provided with it, is not allowed as it could result in robot malfunction and will void the
warranty and make the customer liable for any resulting accident.
For service and maintenance please contact your local distributor and specify the serial
number of your robot for future reference.
The manufacturer cannot be held responsible for the damages or failure due to misuse of the
product.
8
To Next Page
Loading...
Need help?
General