5.3 Battery compartment
o-ring
Each time the MANTIS battery compartment
is opened a new SCUBAPRO O-ring must
be used. MANTIS battery compartment
O-rings are available from your authorized
SCUBAPRO UWATEC dealer.
5.4 Display guard
You can protect your MANTIS glass face
with a SCUBAPRO display guard. This foil
can be easily replaced if damaged.
6. MANTIS PC
INTERFACE
6.1 Cradle - accessory
Communication between MANTIS and a
PC/Mac is possible only with a cradle. A
cradle can be bought from your Authorized
SCUBAPRO dealer:
The communication between the MANTIS
and the cradle is established via contacts
to the case. Therefore, if the water contact
or the spring contact on the cradle have
surface dirt, this should be cleaned with a
piece of cloth before use
To avoid scratching your MANTIS, first
place the contacts together and then click
your MANTIS into the cradle.
6.2 Introduction to Scubapro
LogTRAK
LogTRAK is the software that allows
MANTIS to communicate with a Windows-
based PC or Mac OS.
In order to take advantage of any of
these features, you need to establish a
To Next Page
Loading...
