Uwatec Smart PRO User Manual

11
III Diving with Smart
III Uwatec
®
Smart dive computers
English
III
1 Terminology / Symbols
The information on the display of the Smart varies depending on the kind of dive and the dive phase
For information about diving with microbubble-levels (MB-level) see chapter
IV (page 22).
1.1 General terminology / Display during no-stop phase
DIVE TIME
DEPTH
DECO INFO
MAX.DEPTH
CNS O
2
%
NO STOP
%
%
C
Dive time
Elapsed bottom time
No-stop time
24min
Current depth
Maximum depth
26.2 m
Decompression phase
Dive phase during which
ascent is allowed only if
decompression stops are
completed.
No-stop phase
Dive phase during which ascent is allowed
without stop.
Time
Depth
Ascent rate
(Only whilst
ascending)
SPEED
%
Temperature
Current depth
In metres (feet)
Maximum depth
Maximum depth
reached during
the dive.
No-stop time
Remaining time
at a given depth.
(min)
Oxygen toxicity
CNS O
2%
Dive time
Duration of
the dive (min)
O
2% Mix
Selected oxygen
fraction
DIVE TIME
DEPTH
DECO INFO
MAX.DEPTH
CNS O
2
%
m
DECO
STOP
%
%
C
deepest
decompression
depth
Total ascent time to surface (7 min)
2 min
Decompression
Time
6 m
35.7 m
Decompression rangeNo-stop range
3 m
Time
Depth
Decompression
depth
Lowest stage is
displayed.
Decompression time
Prescribed duration of the
decompression stop at the
displayed decompression
stage (minutes).
Total ascent time
Including decompression
stops in minutes.
Decompression stop
All required decompression
stops must be observed.
TANK DATA
RBT
bar
Remaining Bottom Time, RBT
Allowing for ascent time to the
surface and all deco stops if present
(minutes).
RBT 21 min
COM
Tank pressure
TAN K D ATA
bar
COM
1.2 Display during decompression phase / Remaining Bottom Time (RBT)
Eg-SMART III+IV 13.10.2001 11:15 Uhr Seite 11

Uwatec Smart PRO Specifications

General

Brand	Uwatec
Model	Smart PRO
Category	Diving Instrument
Language	English