• Date: Power on date the V-Count device.
Figure 15 Setup Wizard
The system shall be calibrated through setup wizard for correct counting results. All the
configuration pages are accessible from the menu connections on the upper bar of the page.
Auto calibration process takes place only and if only the “Setup Wizard” which is accessible
from first page of the system is used. Interrupting the wizard from random setups will damage
the calibration process and will cause the faulty counting. Using the successive calibration
steps lead by Setup Wizard is highly recommended.
By clicking “Start” button Setup Wizard shall continue with the next step.
To Next Page
Loading...
