EasyManua.ls Logo

V-Count 3D Alpha+ - Web Server Configuration; Remote Server Settings; Counting Settings (Wi-Fi;BLE Slave); Wi-Fi Settings

V-Count 3D Alpha+
71 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3D Alpha+ User’s Manual
56
6.2.3.2 Web Server
In this page, web interface port and usernames and passwords can be changed. The
username and password changes are only accessible by Super Admin user only.
Figure 62 Web Server Settings
After changing settings from this menu, a restart is required.
6.2.3.3 Remote Server
This page is the same with the Setup Wizard 6.2.2.4. Please refer the previous section.
After changing settings from this menu, a restart is required
6.2.4 Counting Settings
In this menu, there are quick access to setup wizard menu configuration pages and some
extra configuration pages are present.
6.2.4.1 Wi Fi Settings
This page is the same with the Setup Wizard 6.2.2.5. Please refer the previous section.
6.2.5 System Commands
In this menu, system command button present. These are command buttons that does not
link to any web interface page. They directly send commands to device.

Related product manuals