6.1.4 Counting Settings
In this menu, there are quick access to setup wizard menu configuration pages and some
extra configuration pages are present.
6.1.4.1 Wi – Fi Settings
This page is the same with the Setup Wizard Wi – Fi Processing – Step 5. Please refer the
previous section.
6.1.4.2 BLE Devices
This page is the same with the Setup Wizard 6.1.2.6. Please refer the previous section.
6.1.5 System Commands
In this menu, system command button present. These are command buttons that does not
link to any web interface page. They directly send commands to device.
Figure 48 System Commands
System commands are:
• Reset Application: Only resets the application while the device still is powered on.
• Reboot: Soft power cycle the device
• Logout: Logouts the current web interface session
“Reset Application” and “Reboot” are required after some system settings.
To Next Page
Loading...