Figure 63 System Commands
System commands are:
• Reset Application: Only resets the application while the device still is powered on.
• Reboot: Soft power cycle the device
• Logout: Logouts the current web interface session
“Reset Application” and “Reboot” are required after some system settings.
6.2.6 Advanced Settings
6.2.6.1 Logs
In this page, system logs are reported. All the logs are written in spoken language to enable
user to handle system errors or warnings easily.
There are 6 levels of logging and off option in the system:
• Logging off: All the log messages are disabled.
• Error: Only error conditions are logged
• Notice: Errors and critical notifications about the system
• Auto Working: Error logs and auto working hour detection conditions are logged
• Warning
• Info
• Debug
There are 2 types of log Files:
• Output.log: This file is limited to 5MB. The logs are belonging to Engine opening and
closing states when the engine does not run.
To Next Page
Loading...
