Need help?Do you have a question about the V-Count 3D Alpha+ and is the answer not in the manual?
General| Brand | V-Count |
|---|---|
| Model | 3D Alpha+ |
| Category | Cash Counter |
| Language | English |
Details network and electrical connection methods for V-Count devices.
Describes the process and apparatuses for mounting the V-Count device.
Discusses field installation procedures for Wi-Fi/BLE analytics projects.
Provides credentials and instructions for accessing the V-Count system interface.
Outlines the 9-step wizard for device calibration and initial settings.
Configures network settings for device LAN connection.
Sets the device's time zone for accurate date/time logging.
Guides on entering the precise mounting height for auto-calibration.
Defines the counting region (ROI) and excludes irrelevant areas.
Marks the floor area for accurate counting in an empty scene.
Explains drawing lines to define traffic direction.
Details live stream image parts and parameters for auto-calibration tuning.
Sets store opening/closing hours for counting intervals.
Accesses network settings, matching Setup Wizard Step 2.
Accesses time zone settings, matching Setup Wizard Step 3.
Allows changing web interface port, usernames, and passwords.
Configures connection methods to the reporting server.
Accesses incoming/outgoing wires setup, matching Setup Wizard Step 7.
Combines Counting Region and Floor Selection setups.
Accesses live stream settings, matching Setup Wizard Step 8.
Displays system logs and allows changing logging levels.
Configures video recording for processing and raw camera feeds.
Manages synchronization of unsent data and old records.
Details configuration steps for the Wi-Fi/BLE Master device.
Provides credentials for logging into the Wi-Fi/BLE Master device interface.
Outlines the setup wizard for Wi-Fi/BLE Master and BLE projects.
Configures network settings for Wi-Fi/BLE devices.
Sets the time zone for Wi-Fi/BLE devices.
Sets working intervals for Wi-Fi/BLE devices.
Configures Wi-Fi and BLE signal detection parameters.
Sets serial IDs for slave BLE devices in crescent installations.
Configures server connection for Wi-Fi/BLE devices.
Accesses network settings, matching Setup Wizard 6.1.2.2.
Accesses time zone settings, matching Setup Wizard 6.1.2.3.
Changes web interface port, usernames, and passwords.
Accesses remote server settings, matching Setup Wizard 6.1.2.7.
Accesses Wi-Fi processing settings, matching Setup Wizard 6.1.2.5.
Accesses BLE device settings, matching Setup Wizard 6.1.2.6.
Displays system logs and logging level options.
Provides credentials for logging into the Wi-Fi/BLE Slave device interface.
Outlines the setup wizard for BLE Analytics Master and Slave devices.
Sets the time zone for Wi-Fi/BLE Slave devices.
Sets working intervals for Wi-Fi/BLE Slave devices.
Configures server connection for Wi-Fi/BLE Slave devices.
Configures Wi-Fi signal detection parameters for Wi-Fi/BLE Slave devices.
Accesses time zone settings, matching Setup Wizard 6.2.2.2.
Changes web interface port, usernames, and passwords.
Accesses remote server settings, matching Setup Wizard 6.2.2.4.
Accesses Wi-Fi processing settings, matching Setup Wizard 6.2.2.5.
Displays system logs and logging level options.
Describes the meaning of LED indicators for power, camera, and network.
Details the procedure for resetting the device to factory settings.
Step-by-step instructions for setting IP on MacOS.
Step-by-step instructions for setting IP on Windows 10.
To Next Page
