V-TEK DigiOpen 2Easy DMR18S - Deleting Access Cards; Card Information Display; System Formatting; Monitoring and Device Status

2 EASY
4.Format: Press 5 to enter Format page. Input 8 digits password
to start formatting
3.Card Information: Press 4 to enter Card Information
page, the card count will be showed
To search the Gateway and Online Monitors,input the monitor code
number to search
To search the online door stations and the other accessories
To check the voltage of the monitor the monitor must be online
2.Delete Card:
ONLINE MONITORS
ONLINE DEVICES
VOLTAGE MEASURE
In debug state, press 1#
to enter Tools
In debug state, press 1#
to enter Tools
In debug state,press 1#
to enter Tools
Press 4 to enter
Online Monitors
Press 5 to enter
Online Devices
Press 6 to enter
Card Manage
Input the search
range, then press #
to start search
All devices online or
ofine will be showed
Input the code, then
press # to search
Pres NO.
to select
*Back
Tools
1.Installer Setup
2.Setup
3.Card Manage
4.Online Monitors
5.Online Devices
6.Voltage Measure
>> Debug State <<
0-# Redial
1-# Tools
2-# Exits
* Cancel # Save
4. Online Monitors
(Search Range)
Gateway:[ ]
IM:[ ] ~ [ ]
Pres NO.
to select
*Back
Tools
1.Installer Setup
2.Setup
3.Card Manage
4.Online Monitors
5.Online Devices
6.Voltage Measure
>> Debug State <<
0-# Redial
1-# Tools
2-# Exits
* Cancel # Save
5. Online Devices
[CDS1]: Online
[CDS2]: Online
[CDS3]: Fail
[CDS4]: Fail
Pres NO.
to select
*Back
Tools
1.Installer Setup
2.Setup
3.Card Manage
4.Online Monitors
5.Online Devices
6.Voltage Measure
>> Debug State <<
0-# Redial
1-# Tools
2-# Exits
* Cancel # Save
[ - - ]
6. Voltage Measure
* Cancel # Save
Show The Card
2. Delete By Card
* Cancel # Save
2. Delete By Card
i
Updated
Card numbs:15977131
s
e
r
U
C
a
r
d
• Press 2 to enter Delete By Card
• Press 3 to enter Delete By Monitor code
* Cancel # Save
Please Input Room Code
3. Delete By M.code
[ - - - ]
* Cancel # Save
Please Input Room Code
3. Delete By M.code
[ 0 0 1 ]
i
Updated
* Cancel # Save
Card Count: 320
4. Cards Information
* Cancel # Save
[ - - - - - - - - ]
5. Format
Please Input Password
* Cancel # Save
[ 66666666 ]
5. Format
Please Input Password
i
Updated
CONFIGURATION
Debug Mode
DMR18S Technical Manual -7-