Vacon 10 - Before Running the Motor

installation vacon • 5
24-hour support +358 (0)201 212 575 • Email: vacon@vacon.com
2
2.2 Cabling and connections
2.2.1 Power cabling
Note! Tightening torque for power cables is 0.5 - 0.6 Nm (4-5 in.lbs).
Figure 2.4: Vacon 10 power connections, MI1
Figure 2.5: Vacon 10 power connections, MI2 - MI3
1~ (230V)
3~ (230V, 400V)
Motor out
MAINS
MOTOR
Strip the
plastic cable
coating for
360° earthing
L1 L2/N L3 U/ T1 V/ T2 W/T3R+ R-
1~ (230V)
3~(230V, 400V,575V)
1~ (115V)
MAINS
MOTOR
BRAKE
RESISTOR
External brake resistor
Motor out
Strip the
plastic
cable
coating
for 360°
earthing
3~(230V, 400V, 575V)