Vacon NX OPTC2 - Page 41

metasys n2 vacon • 41
24-hour support +358 (0)40 8371 150 • Email: vacon@vacon.com
7
Multipurpose Control application
ID
Data
Value
Unit
Scale
2003 Reference Speed Reference % 0.01%
2001 ControlWord Start/Stop Command
Fault reset Command
- -
2004 Process Data IN1 Torque Reference % 0.1%
2005 Process Data IN2 Free Analogia INPUT % 0.01%
2006–2011
PD3 – PD8
Not Used
-
-
Table 28.
PID control and Pump and fan control applications
ID
Data
Value
Unit
Scale
2003 Reference Speed Reference % 0.01%
2001 ControlWord Start/Stop Command
Fault reset Command
- -
2004 Process Data IN1 Reference for PID
controller
% 0.01%
2005
Process Data IN2
Actual Value 1 to PID
controller
%
0.01%
2006 Process Data IN3 Actual Value 2 to PID
controller
% 0.01%
2007–2011 PD4–PD8 Not Used - -
Table 29