VADDIO AV BRIDGE MATRIX PRO - Page 56

AV Bridge MATRIX PRO
AV Bridge Matrix Pro Manual - Document Number 342-0915 Rev C Page 56 of 68
Camera zoom
Zoom the specified camera in for a close-up view or out to show more of the room.
Synopsis
camera [1-3] zoom {in | out | stop} <1-7>
Required
[1 – 3]
Specify which camera to zoom.
Options
in <1 – 7>
Zoom the camera in. Optionally specify speed as an integer from 1
to 7. Default speed is 3.
out <1 – 7>
Zoom the camera out. Optionally specify speed as an integer from 1
to 7. Default speed is 3.
stop
Stop the zoom movement.
Examples
camera 3 zoom in
Zooms camera 3 in at the default speed
camera 1 zoom out 7
Zooms camera 1 out using a speed of 7
camera 1 zoom stop
Stops the zoom movement of camera 1
Camera preset
Store preset camera positions or move the camera to a stored preset.
Synopsis
camera [1 – 3] preset {recall | store} [1-16] [tri-sync <1-24>] [save-ccu]
Required
[1 – 3]
Specify which camera’s presets to work with.
Options
store [1 – 16]
[tri-sync
<1-24>]
[save-ccu]
Store the current position as a preset. Specify the preset number as
an integer from 1 to 16. The preset number is required.
Optionally store a tri-sync setting with this preset. When recalled, the
camera will move to this preset using tri-sync. The tri-sync speed is
optional and is an integer from 1 to 24.
Optionally store the current CCU settings as well as position for this
setting.
recall [1 – 16]
Move the camera to a previously stored preset position. Specify the
preset number as an integer from 1 to 16.
Examples
camera 1 preset store 1
Store camera 1 position as preset 1.
camera 1 preset store 2 tri-sync 10 save-ccu
Store camera 1 position and CCU settings as preset 2, will recall using tri-sync at speed 10.
camera 2 preset store 4 tri-sync 15
Store camera 2 position as preset 4, will recall using tri-sync at speed 15.
camera 2 preset recall 3
Move camera 2 to preset position 3.