Vaisala CARBOCAP GMW90 Series - Transmitter Parts; Figure 2 Transmitter Parts - Outside

Chapter 2 ___________________________________________________________ Product Overview
VAISALA ________________________________________________________________________ 15
Transmitter Parts
1310-038
Figure 2 Transmitter Parts - Outside
1
=
Locking screw for mounting base (M3×6).
2
=
Inlet for CO
2
calibration gas.
Use a 3 mm inner diameter silicone tube and 0.4 l/min flow.
3
=
Adjustment trimmers.
4
=
Service port.
5
=
Window for display (only in models where the display is visible)
6
=
Locking screw for slide (M3×6).
7
=
Display.
8
=
CO
2
level indicator LEDs. Enabled on models with LED option.
Default settings:
- Green LED (bottom): lit between 0 ... 800 ppm CO
2
.
- Yellow LED (middle): lit between 800 ... 1200 ppm CO
2
.
- Red LED (top): lit between 1200 ... 5000 ppm CO
2
,
blinking at > 5000 ppm CO
2
.
9
=
Type label.
10
=
Holes for indicator LEDs (only in models with LED option).
11
=
Grip for slide.
7
9
8
11
10
1
3
4
2
5
6