Vaisala CARBOCAP GMW90 Series - Operation Pressure Object; Table 34 Status Flags; Table 40 Status Flags

Appendix A _________________________________________________________ BACnet Reference
VAISALA ________________________________________________________________________ 93
Table 35 Reliability
State
Cause
0 NO_FAULT_DETECTED
1 NO_SENSOR
No contact to measurement module
2 OVER_RANGE
RH over 100%
3 UNDER_RANGE
RH under 0%
7 UNRELIABLE_OTHER
Other measurement error
Table 36 Event State
State
Cause
0 NORMAL
Reliability equals 0 (NO FAULT DETECTED)
1 FAULT
Reliability not 0
Operation Pressure Object
Set current atmospheric pressure to apply pressure compensation to CO
2
measurement, and to improve the calculation accuracy of pressure
dependent humidity parameters.
NOTE
Pressure and Altitude
objects are linked together. If Present Value in one
object is changed, Present Value in another object is changed
accordingly.
Table 37 Operation Pressure Object Properties
Property
Data type
Writable
Value or Initial Value
Object Identifier
BACnet Object Identifier
No
00 80 00 01 (hex)
Object Type = 2,
Instance = 1
Object Name
Character String
No
"OPER P"
Object Type
BACnet Object Type
No
2 (Analog Value)
Present Value
Real
Yes
1013.25
Description
Character String
No
"Operation Pressure"
Units
BACnet Engineering Units
No
133 (hectopascals)
Status Flags
BACnet Status Flags
No
0 (FAULT == FALSE)
Event State
BACnet Event State
No
0 (NORMAL,
does not change)
Out of Service
BOOLEAN
No
0 (FALSE)
Table 38 Status Flags
Flag
State
Cause
IN_ALARM
FALSE
Always FALSE
FAULT
FALSE
Always FALSE
OVERRIDDEN
FALSE
Always FALSE
OUT_OF_SERVICE
FALSE
Always FALSE