Chapter 3 ________________________________________________________________ Operation
VAISALA_______________________________________________________________________ 27
0810-073
Figure 9 MI70 Basic View
You can change the default shortcuts of the shortcut buttons; see section
MI70 Indicator Settings on page 31.
Numbers refer to Figure 9 on page 27:
1 = Selected quantities (1 ... 3), measurement value and unit.
Also shows the MI70 port (I or II) that is connected to the
instrument that measures the quantity.
2 = Battery indicator (showing full battery)
3 = Alarm indicator, shown when the alarm function is enabled.
4 = Indicator for serial connection, shown when the MI70 is
connected to a PC
5 = Indicator for chemical purge, shown when purge is active
6 = Environment settings (showing pressure compensation setting
for RH measurement)
7 = Shortcut button Graphic switches the display to graph mode
8 = Shortcut button Hold/Sa freezes the display, and allows you
to save the data point to memory
9 = Shortcut button Record takes you to the Recording/Viewing
menu
To Next Page
Loading...
