Chapter 6 ______________________________ Serial Line Communication With PTB330 Barometer
VAISALA_______________________________________________________________________ 77
Other Commands
?
Use the serial line command ? to check the current barometer
configuration. Command ?? is similar but can also be used if the
barometer is in POLL mode.
Example:
>?
PTB330 / 1.04
Serial number : D5050002
Batch number : D4120001
Output format : P #R #N
Adjust. date : 2008-12-12
Adjust. info : Vaisala/HEL
Date : 2000-01-01
Time : 00:00:24
Start mode : TS
Baud P D S : 19200 N 8 1
Output interval: 1 s
Address : 0
Echo : ON
Module 1 : EMPTY
Module 2 : BARO-1
Module 3 : EMPTY
Module 4 : EMPTY
>
ERRS
Use the command ERRS to display all unacknowledged errors (and
clear them). If an error is still active, it will be displayed again with the
ERRS command.
Example:
>errs
PASS
No errors
>
To Next Page
Loading...
