User's Guide ______________________________________________________________________
100 _________________________________________________________________ M210455EN-B
0303-045
Figure 51 Bolts and Washers for Securing the Hinge
The following numbers refer to Figure 51 above:
1 = Allen bolt
2 = Spring washer
3=Washer
3. Lower the mast slowly by turning the winch counter-clockwise.
CAUTION
You should always have a good grip on the handle.
4. Install the tilting support to the end of the mast (see Figure 52 on
page 101).
5. Lower the mast slowly with the winch so that the mast finally
rests on the tilting support.
To Next Page
Loading...
