User's Guide ______________________________________________________________________
40 __________________________________________________________________ M210455EN-B
Handheld Terminal
This chapter contains information that is needed for using the
Handheld Terminal QMD101M.
The handheld terminal provides the following main functions:
- Paged screens for measurement and calculation results produced by
the TACMET MAWS logger.
- Alarm screen, that shows active alarms.
- Setup screen for setting environmental variables such as time and
altitude.
9906-009
Figure 29 Handheld Terminal
Turning the Terminal On/Off
The terminal is powered by TACMET MAWS. To turn on the
terminal, press and release the On/Off key. After a few seconds, the
terminal stays on the Status screen. After startup, there might be some
error messages. Ignore all of the error messages that come within the
first five minutes.
To turn off the terminal, press and hold the On/Off key for a second.
To Next Page
Loading...
