CONTENTS (Continued)
Section Heading Page
11. BURNER & SUPPLY PIPE INSTALLATION 26
11.1 Fitting the burner. 26
11.2 Supply pipe installation. 26
11.3 Preliminary burner checks. 27
11.3.1 Lighting the fire. 27
11.3.2 Operating the burner. 27
11.4 Check inlet pressure. 27
12. FASCIA INSTALLATION 28
12.1 Fitting the fascia. 28
12.2 Fitting the heat baffle. 28
13. FULL OPERATING CHECKS 29
13.1 Check the burner operation. 29
13.2 Check for spillage. 29
13.3 Flame supervision and spillage monitoring system. 30
14. FINAL REVIEW 30
15. SERVICING & PARTS REPLACEMENT 31
15.1 To remove the fascia. 32
15.2 To remove the burner unit. 32
15.3 To remove the spillage plate. 33
15.4 To remove the inner panel. 33
15.5 To remove the pilot unit. 33
15.6 To remove the gas valve. 34
15.7 To remove the piezo generator. 34
15.8 To grease the control tap. 34
15.9 To replace the top surface of the burner. 35
15.10 To replace the burner. 35
15.11 To remove the burner injector. 35
15.12 To remove the appliance from the fireplace. 35
Page 6
© Baxi Heating U.K. Limited 2010.
INSTALLER GUIDE
To Next Page
Loading...
