CONTENTS (Continued)
Section Heading Page
10. HOTBOX INSTALLATION 24
10.1 Method 1- Front fixing to fireplace surround. 24
10.2 Cable retention. 24
10.3 Floor sealing. 26
11. BURNER INSTALLATION 27
11.1 Burner and supply pipe installation. 27
11.2.Lighting the burner. 27
11.3 Operating the burner. 27
11.4 Inlet pressure check. 28
11.5 Fitting the burner tray trim. 28
12. FULL OPERATING CHECKS 28
12.1 Check the control settings. 28
12.1.1 Lighting the burner. 28
12.1.2 Operating the burner. 29
13. FASCIA AND FIREFRONT INSTALLATION 29
13.1 Fitting a firefront that has not been supplied with the fire. 29
13.2 Fitting the magnetic three piece fascia trim. 30
13.3 Fitting the Blenheim firefront. 30
13.4 Fitting the Seattle/Siva firefront. 30
14. SPILLAGE AND FLAME SUPERVISION CHECKS 32
14.1 Check for spillage. 32
14.2 Flame supervision and spillage monitoring system. 32
15. FINAL REVIEW 33
16. SERVICING AND PARTS REPLACEMENT 34
16.1 Checking the aeration setting of the burner. 35
16.2 To remove the burner unit. 35
16.3 To remove the pilot unit. 36
16.4 To remove the gas valve. 36
16.5 To remove the burner. 37
16.6 To remove the main burner injector. 37
16.7 To remove the appliance from the fireplace. 37
16.8 To remove the magnetic three piece fascia. 37
Page 6
© GDC Group Ltd 2014
INSTALLER GUIDE
To Next Page
Loading...
Need help?
General
