VARI❋LITE - VL2200 SERIES SPOT LUMINAIRE USER’S MANUAL
70 22-May-01 02.9673.0001 A
Set follow time between cues:
The following procedure is used to set the follow time between each cue. The value
can be different for each cue. The range is 0.0 to 365.9 seconds.
1. Press [Menu].
2. Press [Up] / [Down] arrows until Cue appears. Press [Enter].
3. Press [Up] / [Down] arrows until FLTM appears. Press [Enter].
4. Press [Up] / [Down] arrows to set value. Once the value is set press [Enter]
button. The display will return to FLTM.
To store a cue:
1. Press [Menu].
2. Press [Up] / [Down] arrows until Cue appears. Press [Enter].
3. Press [Up] / [Down] arrows until Stor appears. Press [Enter]. The number
displayed is the cue number to be stored.
4. Press [Enter] to store cue. (Number will increase by one for next cue to be
stored.)
5. Repeat for remaining cues.
To delete a cue:
1. Press [Menu].
2. Press [Up] / [Down] arrows until Cue appears. Press [Enter].
3. Press [Up] / [Down] arrows until Del appears. Press [Enter]. The last cue
number stored will be displayed and only the last cue will be deleted.
4. Press [Enter] to delete cue. (There is no “undo” function.)
To play a cue:
1. Press [Menu].
2. Press [Up] / [Down] arrows until Cue appears. Press [Enter].
3. Press [Up] / [Down] arrows until PCue appears. Press [Enter]. This allows
the stored cues to be selected by using [Up] / [Down] arrows and then played
by pressing [Enter]. (If there are no stored cues, “C --” will be displayed. If
there is one or more cues, “C xx” will be displayed - where xx is the cue
number from 1 to 99. Only cues in one luminaire will play.)
To Next Page
Loading...
