2.2.2 EzSensor Driver Setup
This step is necessary for the installation of EzSensor. Capturing software and Calibration data
for the EzSensor will be installed along with the Windows device driver. A Twain driver is also
installed during this step.
Insert the S/W Installation CD
in the CD-ROM. Setup should
start automatically.
If it does not, click Start > Run
and type
D:\Console\setup.exe or
D:\EzSensor\setup.exe.
The install program for
„EzSensor Acquisition
Software Version 6‟ will
appear. Click the „Next‟ button.
To Next Page
Loading...
