Vatech EzSensor User Manual

15
2.3 Cable Connection & Driver Installation
Step 1
Connect the EzSensor Module
to the Control Board box.
Step 2
Connect the USB PC Interface
Cable to the Control Board
box.
Do not connect the EzSensor and USB PC Interface cable to your computer
until you have successfully installed the setup program.
Be sure to connect the EzSensor module to the control board box before
connecting the USB PC Interface cable to your computer.
Connect only item that has been specified as part of the Medical Equipment
System.

Vatech EzSensor Specifications

General

Brand	Vatech
Model	EzSensor
Category	Medical Equipment
Language	English