Vatech EzSensor User Manual

18
2.4 Installation of the EzSensor Holder
The EzSensor holder is used for mounting the EzSensor to the wall when not in use.
When choosing where to install the EzSensor, locate an area that offers easy access and
visibility during patient examinations.
① Position the holder on a stable, flat surface. Using the holes at the back of the holder as
guides, fasten the holder securely to the wall using two dry wall screws (included).

Vatech EzSensor Specifications

General

Brand	Vatech
Model	EzSensor
Category	Medical Equipment
Language	English