Vatech EzSensor User Manual

16
Step 3
Connect the USB PC Interface
cable connector to the USB
port on the PC.
Be sure to connect the USB
port on backside for
accurate operation.
Step 4
Confirmation of Driver installation at the Device Manager.
Method of Confirmation:
Windows 7 : Control Panel  System and Security System  Device Manager
Windows XP : Settings  Control Panel  System Hardware Device manager
Select „VH EzSensor-N x.x‟, located under Imaging Devices. You should see the message,
“This device is working properly”.

Vatech EzSensor Specifications

General

Brand	Vatech
Model	EzSensor
Category	Medical Equipment
Language	English