Vatech PaX-i Insight

9. Installing Software
PaX-i Plus / Insight (Model: PCH-30CS) Installation Manual 95
English
9.4 Installing the InstallShield
The InstallShield installation information is included in the
USB drive provided as an accessory.
Please check the serial number.txt (eg 047-011752.txt) file.
1. Turn on the PC and the equipment if they are not yet.
2. Insert the CD into the CD-ROM drive or connect the USB drive to the USB
connector and then perform a virus scan for the PC before installing the CD.
3. Go to the InstallShield folder and run Setup.exe.
4. The following screen will appear. Click Next.