Vatech PaX-i Insight

3. Before Installing the System
20 PaX-i Plus / Insight (Model: PCH-30CS) Installation Manual
3. Before Installing the System
Before or during the system installation, make sure that you
use the checklist No.3 through No.6 in the Appendix F.
Installation Checklist.
3.1 Required Tools
The following tools are necessary to install the PaX-i Plus / Insight.
Item
Figure
Size
Wrench Set
1.5 mm -10 mm
(0.06” - 0.4”)
T-shaped Hex
Wrench
6 mm - 10 mm
(0.24” - 0.4”)
Hex Wrench w/
Handle
6 mm - 10 mm
(0.24” - 0.4”)
Ratchet Wrench
Tips: 3 mm - 8 mm
(0.12” - 0.3”)
Needle-nose Pliers
Regular
Monkey Wrench
n/a
Spanner Wrench
n/a