Vatech PaX-i Insight User Manual

4. Installing the Equipment: Base Stand (Optional)
PaX-i Plus / Insight (Model: PCH-30CS) Installation Manual 37
English
2. Put the Main Unit back on the master packing EPS and remove the protective
plastic cover with a knife. Then put the cables down on the floor carefully.
Be careful not to damage the cables or have the column
surface scratched.
3. Assemble two wrench bolts as shown below.
Wrench Bolt
M10 x 25
(Part No. 24)

Vatech PaX-i Insight Specifications

General

Brand	Vatech
Model	PaX-i Insight
Category	Medical Equipment
Language	English