7. Setting up PC
PaX-i Plus / Insight Installation Manual 83
7.3 Installing the Internal Peripherals
Allow enough time to dissipate remnant energy after unplugging the
power cord from the main outlet or PC.
Disregard this section in case the PC system is supplied with
the equipment. (The peripherals have already been installed
inside the PC.)
Whenever handling the fiber optic frame grabber board:
1.
Wear the ant-static glove.
2.
Do not wear the likes of a thick jacket.
The following figures and descriptions are based on the PC model
Z440 from HP.
To Next Page
Loading...
