Settings – total calorie burn
On the M5, the total calorie burn can be set for all trips,
separately for bike 1 and bike 2, for example at the start of
the new cycling season.
ATTENTION: the M5 stores all total values even if you
replace the batteries. No data is lost.
How to set the total calorie burn:
Press and hold the SET button until the settings menu
opens.
Press the BIKE button to move from Totals to Settings.
Press the SET button to open the settings.
“Language” appears on the display.
Press the BIKE or TPC button to scroll to the settings for
the Total Kcal (total calorie burn).
Press the SET button to open the settings.
Press the BIKE or TPC button to select whether you want to
configure the setting for bike 1 or bike 2.
Press the SET button to confirm your selection and open the
setting.
The left digit flashes. Press the BIKE or TPC button
to set the value for this digit.
Press the SET button to confirm your setting.
To Next Page
Loading...
