Resetting the trip section counter to zero
To reset the counter either the section time or the
section distance must be shown on the display.
Press and hold the BIKE button.
The text Trip Section RESET appears on the display.
If you continue to hold down the BIKE button,
the trip section data is now reset to zero.
The following data is reset to zero:
– Section distance
– Section ride time
Resetting trip data after the trip
After each trip, you can reset the data for this trip to zero.
The VDO M5 is then ready for the next trip.
ATTENTION: your total distance (total number of kilometres
ridden), total ride time and total calorie burn (if the heart rate
function is activated) are not reset to zero.
How to reset the trip data:
Press and hold the BIKE button for a few seconds.
The text Tour Data RESET appears on the display.
If you continue to hold down the BIKE button,
the trip data is now reset to zero.
The following data is reset to zero:
– Distance
– Ride time
– Average speed
– Maximum speed
If the heart rate option is activated (see page 45):
– Average heart rate
– Maximum heart rate
– Time in, over and under the set training zone
– Calories
If the cadence option is activated (see page 50):
– Average cadence
– Maximum cadence
To Next Page
Loading...
