Vdwall LVP615S - Page 22

LVP615S
使用说明
22
C/F
Main Input： HDMI
Main In Status： 1080p_60Hz
Blend Input： V1
Blend In Status： PAL
Output size： 1920x1080
Output start： （0，0）
In the signal switching status, press
current seamless switching transition
button continually can change the
time. LVP615S can achieve seamless
switching between any two different input groups of four input groups.
Switching effect includes seamless switching (0s), Fade in/ Fade out (o.5s 1s
1.5s) and blend switching.
Seamless switching
（
Cut
）：
On the LCD“Switch time” is 0s. LVP615S default
switching is CUT.
Fade in fade out
（
Fade
）：
On the LCD“Switch time”is 0.5s
、
1.0s or 1.5s. In this
mode, different group signals support fade in fade out switching.
Blend switching
：
at this moment, on the LCD, current input is the main input.
Select different group input signal as blend signal. The main input will overlay
in the blend signal. Press blend signal or main signal button again. Then switch
to selected signal. The whole process is fade in fade out effect.
Note：1. YPbPr does not support seamless switching, fade in
fade out or blend switching. Switching between any signal and
YPbPr signal will cause black led screen.
2. Blend switching is only for signal switching. For other
operations, press C/F to exit the blend switching state.