3.Text overlay
3.1 Text overlay
3.2 Text source
3.3 Text mode
3.4 Threshold R
3.5 Threshold G
3.6 Threshold B
6.3.1 Text overlay operation
In the current input signal
，
press and press↓ to
select”3.text overlay” ， Press to enter ， in the menu“3.1text
” rotate to switch it on. Then press ↓ to enter”3.2text
menu to rotate to select text input signal. Text
overlay is on. If need turn it off, enter
off.
6.3.2 Text overlay parameters setting
3.1Text mode
：
LVP615S can custom text mode < threshold or >
threshold. < threshold means text signal image which is less than
the current threshold value will overlay on the current signal. The
bigger part will be automatically filtered out. > threshold means text
To Next Page
