Vdwall LVP615S - Audio Configuration

LVP615S
使用说明
39
5.1 AD1 config
5.2 AD2 config
knob
OK
6.5 audio setting
5.Audio
5.1 AD1 Config
5.2 AD2 Config
V1
V2
4.2 sharpness
Normal or sharp
，
default : normal.
4.3 brightness
According to “8.5 brightness level” setting,
adjustment range includes 0-64 or 0-100.
The factory default of adjustment range is
0-64 and default is 64.“Brightness level” can
be set in factory setting.
Note
：
1). To make sure of full gray scale of output image, these
output parameters are set as default.
2).Color parameters are invalid for RGB format DP, DVI and
HDMI. VGA is RGB format. So setting is not available.
LVP615S supports 4 channels of stereo audio input signals. Three
of them are HDMI and DP audio. The other two AD1 and AD2 are
external input. Audio input signals for AD1 and AD 2 can be configured
to match the video input signals correspondingly and switching
between AD1 and AD2 is synchronous to that between the video
inputs.
Operation way：
Press ↓ button to select or menu
，
Rotate to select corresponding input signals and press to