Chapter 6: Setup menu instructions
5.4.5 Image freeze (Freeze)
Press
frozen. Press
Freeze status.
button and the indicator is on, the current image is
button again or switch to another signal to exit
5.4.6 Device information view (OK)
In signal switching status, press
setting and information.
to check the LVP615S current
Setup menu is to set the entire processor. There are 9 section including
output image 、 input image 、 text overlay 、 image quality 、 audio 、
communication、language、advance、PIP/PBP、mosaic.
To Next Page
