Vdwall LVP615S - Page 7

LVP615S
使用说明
7
V1
1*Composite Video (PAL/ NTSC)
V2 / YPbPr
1* Composite video (PAL/ NTSC) or analog
component video input
VGA1~VGA2
2 * PC analog signal
DVI
1* DVI ( PC digital signal)
HDMI
1*HDMI (HD digital signal)
DP
1*DisplayPort( digital signal input)
EXT.
1* Extended SDI/HD-SDI/3G-SDI input
3.2.2 Audio input signals
（
AUDIO
）
LVP615S supports 5-channel stereo audio inputs switching. Of
which, 2 channels are DP, HDMI and SDI input. The
other 2 channels are AD1, AD2 external audio input. AD1 and AD2 can be
mapped to any one of signal inputs, and will be switched synchronous to the
selection of video input signals.
Port
Description
VGA OUT
1-channel analog RGBHV signal output,
which can be connected to a local display
device for monitoring (it is strongly
recommended to use this port when
operating and setting LVP615S).
DVI OUT1 /
DVI OUT2
2 same DVI digital graphic signal output,
it can be connected to external 2 LED
transmission cards or LED transmission
boxes.
DVI Loop OUT
1-channel computer DVI digital signal
3.2.3 Video signal output