Setting timing parameter
In user interface click Program, appear setup interface of timer, show as the picture below:
Show as the picture above, there are two types of plan:
（1）
Cycle Plan
（2）
Once plan
Cycle Plan is sub-divided into three types:
（1）
Day plan
（
timing in one day
）
（2）
Weekly plan
（
timing in one week
）
（3） Monthly plan（timing in one month）
User can select one type he desires
The plan items of Day Plan define hours, minutes, seconds;
Each week has 7 days, so the plan items of Week Plan define week day, hour, minute,
second;
To Next Page
Loading...
