Serial Interface Manual
• TLS2 Monitoring Systems
Part No. 577013-767, Revision H 110
Function Code:
647 Version 6
Function Type: Set Tank Multipoint Chart Profile
Command Format: Inquire:
Display: <SOH>S647TTf <SOH>I647TT
Computer: <SOH>s647TTf <SOH>i647TT
Notes:
1. TT - Tank Number (Decimal, 00 all)
2. f - Enable = ‘1’.
To disable change profile to 1,4,20 points or linear.
Typical Response Message, Display Format:
<SOH>
I647TT
AUG 15, 2011 3:11 PM
MULTIPOINT TANK CHART ENABLE
CHART NUM CHART
TANK VALID POINTS ENABLED
1 YES 400 YES
2 YES 80 NO
3 YES 168 NO
4 YES 50 NO
5 NO 0 NO
6 NO 0 NO
<ETX>
Typical Response Message, Computer Format:
<SOH>i647TTYYMMDDHHmmTTf...
TTf&&CCCC<ETX>
Notes:
1. YYMMDDHHmm - Current Date and Time
2. TT - Tank Number (Decimal, 00=all)
3. v - Multipoint Tank Chart valid
4. nnnn - Number of points
5. f - Enabled, ‘1’ = yes, ‘0’ = no
4. && - Data Termination Flag
5. CCCC - Message Checksum
To Next Page
Loading...
