19
8 Dismount
VEGAPOINT 11 • Transistor with IO-Link
63008-EN-200527
8 Dismount
8.1 Dismounting steps
Warning:
Before dismounting, be aware of dangerous process conditions such
as e.g. pressure in the vessel or pipeline, high temperatures, cor-
rosiveortoxicmediaetc.
Take note of chapters "Mounting" and "Connecting to voltage supply"
and carry out the listed steps in reverse order.
8.2 Disposal
The device is made of recyclable materials. For this reason, it should
be disposed of by a specialist recycling company. Observe the ap-
plicable national regulations.
To Next Page
