VELMEX VXM-3 - Precautions

2
CAUTION:
Controller
andACpowersupplyshouldbeoperatingina
wellventilatedarea. Donotuseinawet,dirty,orexplosive
environment. Inindustrialenvironments,repackaginginto
aNEMAgradeenclosureisrequired.
Donotdisconnectmotorwhilerunning. KeepMotorand
Limitcablesminimumof2”apart. Onlyoperatewith
designatedmotor. Donotaltercablesinanywaywithout
firstconsultingVelmex
!
!
!
!
WARNING:
TO REDUCE THE RISK OF ELECTRICALSHOCK, DO
NOTATTEMPT TO REMOVE COVERS ON POWER
SUPPLYOR CONTROLLER. THEREARE NO USER
SERVICEABLE PARTS INSIDE. Anyservicingshouldbe
donebyVelmexqualifiedservicepersonnel.
CAUTION:
THE VXM MUST BE SET TO THE EXACT
MODEL/TYPE MOTOR(S) BEFORE
OPERATING.
IMPROPER SETTINGS CAN CAUSE
SEVERE DAMAGE TO MOTORSAND
CONTROLLER.
UseVelmexCOSMOSsoftwareto
configureVXMbeforeuse.
CAUTION:
MOTOR(S) GET HOT WHEN RUNNING.
Motor(s) must be mounted to a metal surface
to dissipate internal heat.
Precautions
!!
CAUTION
Mismatched Motor
Settings Damage
Motor & Controller
:KHQ&RQQHFWLQJ
0RWRU6HW&RQWUROOHUWR
WKHH[DFWPRWRUPRGHO
W\SHEHIRUHRSHUDWLQJ
Motors mounted to Velmex actuators/positioners will usually provide
sufficient heat dissipation. Motor surface temperature should not exceed
152 F (70°
C.) In continuous duty applications when the motor is not
mounted to a suitable heat dissipating device, motor surface temperature
could exceed
°
152 F (70°
°
C.)