VELMEX VXM-3 - Page 36

Outputcommands:
U14
U15
U16
U17
U18
U19
U14
2 bytes
U17
2 bytes
U19
2 bytes
Useroutput2"low". Theuseroutput2(I/O,15)willgoto0V. Thisisthestateof
theuseroutput2onpower-up. Thiscommandisusedinconjunctionwiththe
"U15"command.
Memoryusage=2 bytes.
Useroutput2high. Theuseroutput2(I/O,15)will
goto+5V. This
commandisusedinconjunctionwiththe""command.
Memoryusage=
.
Useroutput3"low". Theuseroutput3(OptionalConnection)willgoto0V. This
isthestateoftheuseroutput3onpower-up. Thiscommandisusedin
conjunctionwiththe""command.
Memoryusage
=
.
Useroutput3high. Theuseroutput3(OptionalConnection)willgoto+5V. This
commandisusedinconjunctionwiththe"U16"command.
Memoryusage=2 bytes.
Useroutput4"low". Theuseroutput4(OptionalConnection)willgoto0V. This
isthestateoftheuseroutput
4onpower-up. Thiscommandisusedin
conjunctionwiththe""command.
Memoryusage=
.
Useroutput4high. Theuseroutput4(OptionalConnection)willgoto+5V. This
commandisusedinconjunctionwiththe"U18”command.
Memoryusage=2 bytes.
SeeAlso
U4, U5
36